Acer VT270 Handleiding

Acer Monitor VT270

Lees hieronder de 📖 handleiding in het Nederlandse voor Acer VT270 (47 pagina's) in de categorie Monitor. Deze handleiding was nuttig voor 70 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/47

USER GUIDE

L CD Monitor VT0 ser s/VT270ie

English

Acer LCD Monitor Quick Start Guide (QSG)

Important safety instructions

Please read the following instructions carefully.

1. To clean the LCD monitor screen:

• Turno󰀨theLCDmonitorandunplugthepowercord.

• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage

it.

3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.

4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of

any nature.

5. Store the LCD monitor in a room with a temperature of -20°C to 60°C (-4°F to 140°F). Storing the LCD monitor

outside this range may result in permanent damage.

6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:

• Monitor-to-PC signal cable is frayed or damaged.

• Liquid spills onto the LCD monitor or the monitor is exposed to rain.

• The LCD monitor or case is damaged.

Attaching the monitor to the base

1. Remove the monitor from the packaging.

2. Attach the footstand to the base. (for selected models).

3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)

4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)

Connecting your monitor to a computer

1. Turno󰀨yourcomputerandunplugyourcomputer'spowercord.

2. Connect the signal cable to VGA (Optional) and/or HDMI (Optional)

input socket of the monitor, and the VGA (Optional) and/or HDMI

(Optional) output socket of the graphics card on the computer. Then

tighten the thumbscrews on the signal cable connector.

3. USB Type B Cable (Optional, USB Type B input models only)

Connect one end of the USB Type B cable (optional) to your

computer and connect the other end to your electric devices.

Connect the USB Type B (3.0) cable to port for fast charge (5V/1.5A).

Connect the USB Type B (3.0) cable to port.

4. Insert the monitor power cable into the power port at the back of the

monitor.

5. Plug the power cords of your computer and your monitor into a

nearby electrical outlet.

Note: Audio output is only for audio output model. Please check user

manual for more instruction.

USB 3.0 (5V/1.5A)

AdaptiveSync (HDMI):

It can allow a AdaptiveSync supported graphics source to dynamically adjust display refresh rate based on typical content

frameratesforpowere󰀩cient,virtuallystutterfreeandlow-latencydisplayupdate.

345

Product specificaties

Merk:	Acer
Categorie:	Monitor
Model:	VT270
Kleur van het product:	Zwart
Resolutie:	1920 x 1080 Pixels
Touchscreen:	Ja
Oorspronkelijke beeldverhouding:	16:9
Kijkhoek, horizontaal:	178 °
Kijkhoek, verticaal:	178 °
Meegeleverde kabels:	HDMI
Beeldscherm vorm:	Flat
Typische contrastverhouding:	1000000:1
VGA (D-Sub)poort(en):	1
Aantal HDMI-poorten:	1
Ingebouwde luidsprekers:	Ja
Beeldscherm, aantal kleuren:	16,7 miljoen kleuren
Maximale refresh snelheid:	- Hz
HD type:	Full HD
HDMI:	Ja
Display technologie:	LCD
Responstijd:	4 ms
VESA-montage:	Ja
Paneelmontage-interface:	100 x 100 mm
Helderheid (typisch):	300 cd/m²
Ingebouwde camera:	Nee
Backlight type:	LED
Hoofdtelefoon uit:	Ja
Staander inbegrepen:	Ja
kantel aanpassingen:	Ja