Access Lighting Cobra 52204 Handleiding
Access Lighting
Niet gecategoriseerd
Cobra 52204
Bekijk gratis de handleiding van Access Lighting Cobra 52204 (3 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 5.0 sterren uit 1.5 reviews. Heb je een vraag over Access Lighting Cobra 52204 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/3
IMPORTANT
Before assembling your access lighting fixture, please make sure that
you carefully read through these instruction sheets. Consider having
your fixture installed by a qualified licensed electrician.
NOTE: The important safeguards and instructions that appear in this
manual are not meant to cover all possible conditions and situations
that may occur. It must be understood that common sense, caution and
care, are factors that can’t be built into any product. These factors must
be supplied by the person(s) caring for and operating the fixture.
STEP BY STEP INSTRUCTIONS
Before starting your installation disconnect the Power by turning off the
Circuit Breaker or by removing the fuse at the fuse box. Just turning the
k.
PREPARE FIXTURE
If there is an existing fixture remove it.
Expose the supply wire from the outlet box .
Secure the crossbar to the J-box with the supplied screws.
Ensure that the additional screws face downward.
GENERAL INFORMATION
All electrical connections must be in accordance with all ordinances,
Local and National Electrical Codes. These fixtures are intended for
mounting to a standard 4” x 2 1/2”metal octagon outlet box. The box
must be directly supported the building structure and U.L. Recognized.by
WHAT YOU NEED
•
Screwdriver
• Wire Cutters
• Wiring Supplies as Specified
by Electrical Code
•
4 x 50W GU10 Bulb
INSTALLATION INSTRUCTIONS
WHAT WE PROVIDE
•
Crossbar
•
Mounting Hardware
•
Canopy with track
•
4 x socket rings
COLLECTION
CERTIFICATION: ETL DRY NO. 52204
Cobra 52204
APPLICATION MODEL NO.
Wall and Ceiling
CERTIFICATION: ETL DRY NO. 52204
MOUNT THE CANOPY
Fit the fixture canopy up to the crossbar. Insert the
hanging screws into the designated holes in the canopy.
Secure with the supplied screws.
INSERT THE BULBS
Insert the bulbs .
MAXIMUM WATTAGE 50W.
DO NOT EXCEED THE RECOMMENDED WATTAGE AS
STATED ON THE WARNING LABEL AND
INSTRUCTION SHEETS.
SECURE THE SOCKET RING
Place the socket ring over the bulb and secured
with supplied screws.
CONNECT THE WIRES
Connect the black supply wire to the black fixture wire.
Secure with the supplied wire nuts. Connect the white
supply wires to the white fixture wire. Secure with the
supplied wire nuts. Either wrap the green wire around
one of the protruding screws or connect it to the supply
ground wire. Secure all wires with U.L. Certified electrical
tape (not supplied).
Tuck all wires carefully into the J-Box.
CERTIFICATION: NO. ETL DRY 52204
Please ensure that the fitting is cool and
switched off before replacing the bulb.
DO use bulbs tha exceed the NOT t might
maximum wattage, stated on caution label.
CAUTION
RESTORE THE ELECTRICITY AND
CHECK THE OPERATION OF YOUR
NEW ACCESS FIXTURE
Product specificaties
| Merk: | Access Lighting |
| Categorie: | Niet gecategoriseerd |
| Model: | Cobra 52204 |
Heb je hulp nodig?
Als je hulp nodig hebt met Access Lighting Cobra 52204 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Access Lighting
5 Juli 2025
4 Juli 2025
Handleiding Niet gecategoriseerd
- TechBite
- Logilink
- Hamilton Beach
- Xaoc
- BendixKing
- Nanni
- Kubo
- Olympus
- Baby Lock
- Ocean Way Audio
- Medela
- Plastkon
- Prince Castle
- Anybus
- Ontel
Nieuwste handleidingen voor Niet gecategoriseerd
5 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025