Access Lighting Burst 63122LEDDLP Handleiding
Access Lighting
Lamp
Burst 63122LEDDLP
Bekijk gratis de handleiding van Access Lighting Burst 63122LEDDLP (2 pagina’s), behorend tot de categorie Lamp. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.6 sterren uit 2 reviews. Heb je een vraag over Access Lighting Burst 63122LEDDLP of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/2
WHAT YOU NEED
•
Screwdriver
• Wire Cutters
• Wiring Supplies as Specified
by Electrical Code
INSTALLATION INSTRUCTIONS
WHAT WE PROVIDE
•
Mounting Hardware
• Canopy with lamp holder
• 49 x Glass bar
• 9 x G9 LED bulb
COLLECTION
CERTIFICATION: cULus DRY
NO.
63122LEDDLP
BURST
63122LEDDLP
APPLICATION MODEL NO.
Pendant Fixture
IMPORTANT SAFETY INSTRUCTIONS
MESURES DE SECURITE A RESPECTURE
Before assembling your ACCESS LIGHTING fixture, please make sure that
you carefully read through this instruction sheet. Save this instruction sheet
and refer to it when additions to or changes in the fixture
configuration are made.
Lisez attentivement ce manuel d’instructions. Enregistrer cette feuille
d'instructions et de s'y référer lorsque les ajouts ou changements dans
la configuration de montage sont faites.
CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH
CIRCUIT CONDUCTOR.
CONSULTER UN ELECTRICIEN QUALIFIE POUR VOUS ASSURER QUE LES
CONDUCTEURS DE LA DERIVATION SONT ADEQUATS
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE
INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION
AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
CE PRODUIT DOIT ETRE INSTALLE SELON LE CODE D’INSTALLATION PERTINENT,
PAR UNE PERSONNE QUI CONNAIT BIEN LE PRODUIT ET SON FONCTIONNEMENT
AINSI QUE LES RISQUES INHERENTS
NOTE: The important safeguards and instructions that appear in this
manual are not meant to cover all possible conditions and situations
that may occur. It must be understood that common sense, caution and
care, are factors that can’t be built into any product. These factors must
be supplied by the person(s) caring for and operating the fixture.
Read all instructions
Do not install this fixture in hazardous locations.
N'installez pas cet appareil dans des emplacements dangereux.
Do not install any fixture assembly closer than 6 inches from any
curtain or similar combustible material.
Laisser une distance d’au moins 6 pouces entre ce luminaire et la toute
surface combustible.
"WARNING Risk of Fire and Electric Shock."
“CAUTION: Risque d’ Incendie et de Choc Electriques.”
GENERAL INFORMATION
All electrical connections must be in accordance with all ordinances,
Local and the U.S. National Electrical Codes (NEC). These fixtures are
intended for mounting to a standard 4” metal octagon outlet box.
The box must be directly supported by the building structure and U.L.
Recognized.
STEP BY STEP INSTRUCTIONS
Before starting your installation disconnect the Power by turning off the
Circuit Breaker or by removing the fuse at the fuse box. Just turning the
light off at the light switch is not sufficient to prevent electrical shock.
Recommended Dimmers for Supplied Bulb
(ELV) LUTRON Diva DVELV300P
(ELV) LUTRON Diva DVELV-303P
(ELV) LUTRON Skylark SELV-300P
(TRIAC) LUTRON Diva DV-600P
CERTIFICATION: NO. cULus DRY
63122LEDDLP
MOUNT CROSSBAR AND MAKE WIRE
CONNECTION
If there is an existing fixture remove it.
Install the crossbar and mount it to the J-Box with
the supplied screws. Expose the supply wires from the
J-box. Connect the black supply wire to the black
fixture wire. Secure with the supplied wire nuts.
Connect the white supply wire to the white fixture wire.
Secure with the supplied wire nuts. Attach the green
J-Box wire around green hexagonal head screw or
connect it to the green supply grounding wire of the
fixture. Secure all wires with electrical tape
(not supplied). Tuck all wires carefully into the J-Box.
MOUNT THE CANOPY
Adjust the length of the wire using the grip lock.
Fit the canopy up to the crossbar. Align the holes of
the canopy and secure with the supplied screw
knobs.
INSERT THE BULB AND GLASS BAR
Insert the bulbs.
DO NOT EXCEED THE MAXIMUM WATTAGE AS
STATED ON THE WARNING LABEL
Fit the glass bar to the centre ball and screw up.
If the glass bar is dirty, polish it with wet cotton cloth,
don’t use any chemical liquid or solvent.
Please ensure that the fitting is cool and
switched off before replacing the bulb.
DO use bulbs tha NOT t exceed the
maximum wattage, stated on caution label.
CAUTION
RESTORE THE ELECTRICITY AND
CHECK THE OPERATION OF YOUR
NEW ACCESS LIGHTING FIXTURE
VER: 18.12.1
Product specificaties
| Merk: | Access Lighting |
| Categorie: | Lamp |
| Model: | Burst 63122LEDDLP |
Heb je hulp nodig?
Als je hulp nodig hebt met Access Lighting Burst 63122LEDDLP stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Lamp Access Lighting
4 Juli 2025
Handleiding Lamp
- Maxcom
- EMOS
- ActiveJet
- August
- X4-Tech
- Sygonix
- Smartwares
- Physa
- Klarstein
- Media-tech
- Pixel
- Blaupunkt
- Smart
- Impact
- Fuzzix
Nieuwste handleidingen voor Lamp
4 Juli 2025
4 Juli 2025
4 Juli 2025
3 Juli 2025
3 Juli 2025
3 Juli 2025
3 Juli 2025
2 Juli 2025
1 Juli 2025
1 Juli 2025