7inova 7R152 Handleiding

7inova Router 7R152

Lees hieronder de πŸ“– handleiding in het Nederlandse voor 7inova 7R152 (2 pagina's) in de categorie Router. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Before you start to use this device, please check if there’s anything
missing in the package, and contact your dealer of purchase to
claim for missing items:
Package Contents:
1x 7R152 Wifi Repeater
1x 1m Ethernet cable with RJ45 connector
1x Quick Installation Guide
Wireless-11N WallMounted Wifi Router 300M
Quick Installation Guide
Model 7R152:
LED indicators’ Status Description:
WPS Button
Ethernet
Reset Button
WLAN LED
WPS LED
Ethernet LED
Power LED
Euro plug
Cautions:
1. Disconnect the device in thunderstorms in case of lightning damage.
2. Keep far from heat source and ensure ventilation.
3. Keep waterproof in the storage, transportation and operating environment.
Indicator Name
Power Status Indicator
Wireless Status Indicator
WPS Status Indicator
Ethernet Status Indicator
Green On Get Powered
Green slow blink Wireless Function Launched
Green fast blink
Not bright
WPS Function Launched
Not use or have
completed the connection
Green fast blink
Green fast blink
Green On
Data Transmission via Ethernet
Ethernet Connected
Data Transmission via wireless
Status Description
Reset: If need to reset the router, press and hold RESET button for 3-5
seconds, release until all other LED are off except Power LED.
Note: Please check whether the WiFi-Router accord with factory default settings
once you can’t download http://192.168.2.1. If you are still not sure what reasons,
you can reset the WiFi-Router, just need to press the reset button for 3-5 seconds,
then try again.
Appearance Introduction
1 Computer Configuration
3 Configuration Mode
2 Connect To Wireless Network
1.1 Click β€œStartβ†’Control Panelβ†’Network and Internetβ†’Network and Sharing
Centerβ†’Change adapter settingsβ†’Wi-Fi(right click)β†’Properties”
3.1.1 After logging in and click β€œ ”, you will see 3 modes: Operating Mode
Select β€œ ” then click on β€œ ”Bridge Save
3.2.5 Setup your info and click on β€œ ”Next
3.2.6 Click β€œ ” wait for a few, then accord to β€œ ” Finish 4 Reconnect to Router
to reconnect the router.
3.1 Configure Bridge Mode
3.2.3 Wait a few seconds, then refresh the Browser. Select β€œSetup Wizard”,
then click on β€œ ” to continue.Next
3.2.4 You will see β€œWAN Connection Type”: Static IP / DHCP / PPPoE /
L2TP / PPTP.
Static IP: Select β€œ ” and input the network’s IP address information, Static IP
then click β€œ ”Next
3.2.1 Follow process 2.3 to 2.4.
3.2.2 Select β€œRouter” then click on β€œ ”.Save
3.2 Configure Router Mode
2.1 Pulg the Wi-Fi Router to a wall socket.
2.2 Click on the network icon( ) on the right
bottom of your desktop. You will find the signal
from the Wi-Fi Router. Click on β€œ ” and Connect
wait for a few seconds.
2.4 The login screen below will appear.
Enter the β€œ ” and β€œ ” Username Password
then click β€œ ” to login. The default Login
Username is β€œ ” and Password is admin
β€œ ”.admin
2.3 Open web browser and type http://192.168.2.1 in the browser’s address
box. This number is the default IP address for this devices.
1.2 Double click β€œInternet Protocol Version 4(TCP/IPv4)”
1.3 To set up the computer IP 192.168.2.x (x arbitrary integer between
2~252), subnet mask of 255.255.255.0, Click β€œ ”. Back to the last OK
interface and click β€œ ”OK
01 02 03Wireless-N Router Wireless-N Router Wireless-N Router
05 Wireless-N Router04 06 07Wireless-N Router Wireless-N Router Wireless-N Router
300Mbps Wireless Router
FW RVE: 7R152_V1.0
300Mbps Wireless Router
FW RVE: 7R152_V1.0
300Mbps Wireless Router
FW RVE: 7R152_V1.0
300Mbps Wireless Router
FW RVE: 7R152_V1.0
300Mbps Wireless Router
FW RVE: 7R152_V1.0
300Mbps Wireless Router
FW RVE: 7R152_V1.0
300Mbps Wireless Router
FW RVE: 7R152_V1.0
3.2.7 Select β€œ ” and click β€œ ”, then follow process 3.2.5 to 3.2.6DHCP Next
3.2.8 Select β€œ ” and fill your Username and Password provided by PPPoE
network operator.
Follow process 3.2.5 to 3.2.6 after click β€œ ”.Next
300Mbps Wireless Router
FW RVE: 7R152_V1.0
300Mbps Wireless Router
FW RVE: 7R152_V1.0
1) Restore the 7R152’s configuration to its factory default settings. (With
7R152 powered on, use a pin to press and hold the Reset button for
about 3-5 seconds before releasing it).
2)To log in the Web Management page, use the default user name and
password: admin, admin. To connect to the Wireless Network, use the
default password on the label.
3)Try to configure 7R152 once again by following the instructions in the
previous steps of the QIG.
What can I do if I forgot my password?
Appendix: Troubleshooting
3.3.1 Follow process 2.3 to 2.4
3.3.2 Select β€œ ” then click β€œ ”Repeater Save
3.3.4 Select your Wireless SSID to continue.
3.3.5 When you see the site below, please do not change any setting but
only insert the key of your network.
Click on β€œ ” wait for a few, then accord to β€œ ” to Apply 4 Reconnect to Router
reconnect the router
3.3.3 Select β€œWi l Wi l icre ess Sett s ing β†’ re ess Bas Settings”, click β€œ ” S hearc
t hen you will see the new page .
3.3 Configure Repeater Mode
5.2 Wireless Security Configuration
4 Reconnect to Router
4.1 Click β€œStartβ†’C aneontrol P lβ†’Network and Internetβ†’Net rkwo and Sharing
Ce tern β†’Cha e adap ng ter settingsβ†’Wi- t cFi igh(r lick)β†’Properties”
5 Configuring via Web Browser
5.1 Wireless Base Configuration
4.2 Internet Protocol Version 4(TCP/IPv4)Double click β€œ ”
4.3 a P a auto i y DSN S β€œelect Ob in ta n I ddress mat call ” β€œand Ob in ta
server ress mat ca add auto i lly”. Clic ack he lask β€œ ”OK . B t to t
in er ace and lickt f c β€œ ”OK
4.4 S t elect the wireless ne work name
configured in β€œ ” , 3 Configuration Mode
click β€œ ” button.Connect
4.5 If you encrypted wireless network in
β€œ3 Con igu ion f rat M eod ”, the ollowin f g
message will be displayed on web
browser, fill in password, click β€œ ”OK
Please click β€œ ” located at W Wireless Basic Settingsireless Settings β†’
the web management interface, the following message will be displayed
on your web browser:
You could configure the minimum number of Wireless settings for
communication, such as SSID and Channel. The Access Point can be set
simpty with only the minimum setting items.
Please click β€œ ” located W Wireless Security Settingsireless Settings β†’
a t f t the web managemen int er ace, the following me agess will be di pla eds y
on our web brow er y s :
Setup the wireless security and encryption to prevent from unauthorized
access and monitoring. Supports 64/128-bit WEP, WPA-Personal, WPA2-
Personal encryption methods.
5.3 Change Management password
Default password of Wireless Router is β€œadmin”, and it’s displayed on the
login prompt when accessed from web browser. There’s a security risk
you don’t change the default password, since everyone can see it. This is
very important when you have wireless function enabled.
To ng wo ollow cha e pass r fd, please the f uollowing instr ction:
P se β€œlea click S Tystem ool wos β†’ Pass rd” t menu on the web managemen
in er he ollowing me age will bet face, t f ss di pla ed on our web brow ers y y s :
5.4 Firmware Upgrade
The system software used by this router is called as β€œfirmware”, just like
any applications on your computer, when you replace the old application
with a new one, your computer will be equipped with new function. You
can also use this firmware upgrade function to add new functions to your
router, even fix the bugs of this router.
Please click β€œSystem Tools β†’ Firmware Upgrade” located at the located
at the web management interface, then the following message will be
displayed on your web browser.
5.5 Settings Backup and Restore, Factory Default
You can backup all Setting of this router to a file, so you can make several
copied of router configuration for security reason.
To backup or restore router setting, please follow the following instruction:
Please click β€œSystem Tools β†’ Backup and Restore” and β€œSystem
Tools β†’ Factory Default” located at the web management interface,
then the following message will be displayed on your web browser:
If you want to keep original password unchanged, click β€œ ”.Cancel
Click β€œ ” button, the WiFi Router will become effectiveSave
Click β€œ ” button first, you’ll be prompted to provide the filename of Browse
firmware upgrade file. Please download the latest firmware file from our
website, and use it to upgrade your router.
After a firmware upgrade file is selected, click β€œ ” button, and the Upgrade
router will start firmware upgrade procedure automatically.
The procedure may take several minutes, please be patient.
300Mbps Wireless Router
FW RVE: 7R152_V1.0
300Mbps Wireless Router
FW RVE: 7R152_V1.0
300Mbps Wireless Router
FW RVE: 7R152_V1.0
Wireless Status
SSID
Wireless Mode
Channel
SSID Broadcast
Wireless On/Off
Main Service Set Identifier.
It’s the β€œname” of your wireless network.
Supports 11b/g/n mixed modes
Wireless Signal On/Off
6(default)
Back up
Browse
Restore All Settings
P ”Back ress up” bu on ou cantt , y please ave s it a ts ano her
filename for di fferent versions and, keep it in a fe sa place.
P ”Bress rowse” to pick a spreviou ly-saved con figura iont file
f rom your compu ter, and he t click β€œSave”. After he repla t ced
by the file you jus t uploaded.
Click β€œRestore All Settings” button to remove all settings
300Mbps Wireless Router
FW RVE: 7R152_V1.0
Note: Never interrupt the upgrade procedure by closing the web browser or
physically disconnect your computer from router. If the firmware you upgrade is
corrupt, the firmware upgrade will fail, and you may have to return this router to
the dealer of purchase to ask for help. (Warranty voids if you interrupted the
upgrade procedure).
Click β€œ ” and β€œRestore All Settings” button. The router will restart.Save
300Mbps Wireless Router
FW RVE: 7R152_V1.0
300Mbps Wireless Router
FW RVE: 7R152_V1.0
09 Wireless-N Router08 10 11Wireless-N Router Wireless-N Router Wireless-N Router
13 Wireless-N Router12 14 15Wireless-N Router Wireless-N Router Wireless-N Router
300Mbps Wireless Router
FW RVE: 7R152_V1.0
300Mbps Wireless Router
FW RVE: 7R152_V1.0
Click β€œ ” button, the WiFi Router will become effective.Apply


Product specificaties

Merk: 7inova
Categorie: Router
Model: 7R152

Heb je hulp nodig?

Als je hulp nodig hebt met 7inova 7R152 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Router 7inova

Handleiding Router

Nieuwste handleidingen voor Router