3M X90 Handleiding

3M Beamer X90

Lees hieronder de 📖 handleiding in het Nederlandse voor 3M X90 (39 pagina's) in de categorie Beamer. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/39

This manual is only intended to explain Network Functions.

For safety, operations or any other issues, refer to the all user's manual for this

projector.

• Before using the network functions, read the all user's manual

for this projector carefully to ensure your projector is set up correctly.

• After reading, keep the manuals in a safe place for future reference.

WARNING

• The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in

this manual.

• The reproduction, transfer or copy of all or any part of this document is not

permitted without express written consent.

NOTE

Contents

Network Functions .................................................................. 2

Settings ................................................................................... 6

Projector Control ................................................................... 22

Failure & Warning Alerts via E-mail ...................................... 26

Projector Management via SNMP .......................................... 28

Controlling the Projector via Scheduling .............................. 29

e-SHOT(Still Image Transfer) Display ................................... 32

Command Control via the Network ....................................... 34



Trademark acknowledgment

• Windows is a registered trademark of Microsoft Corporation.

• Netscape is a registered trademark of Netscape Communications Corporation.

• JavaScript is a registered trademark of Sun Microsystems, Inc.

All other trademarks are the properties of their respective owners.

X90w

Multimedia Projector

Network Functions

Conguring and Controlling the Projector via a Web Browser

You can change the settings of or control the projector via a network by using a

web browser from a PC that is connected to the same network.

( )4

Failure & Warning Alerts via E-mail

The projector can automatically send an alert to specied e-mail addresses when

the projector requires maintenance or has encountered an error.

( )26

Projector Management via SNMP

This projector is SNMP (Simple Network Management Protocol) compliant,

allowing you to monitor it from a remote location using SNMP software. In

addition, the projector is able to send failure & warning alerts to a specied PC.

( )28

Controlling the Projector via Scheduling

You can schedule the projector to perform various functions according to the

DATE and TIME.

( )29

Still Image Transfer

The projector can display still images that are transferred via the network.

( )32

Projector Control via RS-232C via the Network

The projector can be controlled using RS-232C commands over a network.

( )34

This projector is equipped with the following network functions.

3M™ Digital Projector X90

Network Functions

Before using the network functions…

To use the network functions of this projector, the projector must be congured to

suit your network. Consult with your network administrator before connecting the

projector to your network. Incorrect network conguration of this projector may

cause problems on your network.

Connect to the Gateway (The router/PC that forwards trafc to a destination

outside of the subnet of the transmitting device) from the network terminal on the

projector using a CAT-5 (or greater) cable and congure the following settings.

If using a network with DHCP enabled:

The projector’s network settings can be congured automatically. when [DHCP] on

the network menu is set to [TURN ON]. Please refer to DHCP in network menu. (

Operator's Guide : NETWORK Menu) If a xed / static IP address is required, please

congure your projector according to the steps in the following section.

If using a network system that does not have DHCP enabled or if

using a xed IP address on a network system equipped with DHCP

enabled:

Congure the following settings on the network menu.

( ) Operator's Guide : NETWORK Menu

1. [DHCP] [DHCP] [TURN OFF]: Disable DHCP (Set to ).

2. [IP ADDRESS]: Enter an appropriate IP address for the projector to connect

to your network.

3. [SUBNET MASK]: Enter an appropriate SUBNETMASK for the projector to

connect to your network.

4. [DEFAULT GATEWAY]: Enter an appropriate Gateway (the router/PC that

forwards trafc to a destination outside of the subnet of the transmitting

device) address for the projector to connect to your network.

3M™ Digital Projector X90

Product specificaties

Merk:	3M
Categorie:	Beamer
Model:	X90
Gewicht:	7100 g
Geluidsniveau:	39 dB
Soort lamp:	UHB
Stroomvoorziening:	100 - 120 V, 220 - 240 V, 50/60 Hz
Connectiviteitstechnologie:	Bedraad
Typische contrastverhouding:	1000:1
Markt positionering:	Presentatie
Projector helderheid:	4000 ANSI lumens
Projectietechnologie:	LCD
Projector native resolution:	XGA (1024x768)
Keystone correctie, verticaal:	-40 - 40 °
Keystone correctie, horizontaal:	-20 - 20 °
Geschikt voor schermmaten:	350 "
Aantal kleuren:	16.78 miljoen kleuren
Frequentiebereik horizontaal:	31.5 - 106 kHz
Frequentiebereik verticaal:	56 - 120 Hz
Aantal USB 2.0-poorten:	1
VGA (D-Sub)poort(en):	3
Soort serieële aansluiting:	RS-232
Audio-ingang (L, R):	2
Composiet video-ingang:	1
Componentingang video (YPbPr/YCbCr):	1
S-Video ingang:	1
Aantal Ethernet LAN (RJ-45)-poorten:	1
Focus:	Handmatig
Brandpuntbereik:	24 - 29 mm
Levensduur van de lichtbron:	2000 uur
Type lichtbron:	Lamp
Gemiddeld vermogen:	16 W
Aantal ingebouwde luidsprekers:	4
Certificering:	UL, cUL, FCC Part 15 Class B, CE,\nEN60950, WEEE
Zoomverhouding:	1.2:1
Formaat analoog signaal:	NTSC,PAL,SECAM
RS-232 port:	1
Lampvermogen:	285 W
Audio-ingangen:	2
Audio-uitgang:	1
Beeldverhouding:	4:3,16:9
Plug and play:	Ja
Aansluitingen:	1 x M1-D
Temperatuur bij opslag:	-20 - 60 °C
Levensduur van de lichtbron (besparingsmodus):	3000 uur
Afmetingen (B x D x H):	418 x 319 x 139 mm
Stroomverbruik (typisch):	460 W
Bedrijfstemperatuur (T-T):	5 - 35 °C