Nedis WIFIP120GWT Handleiding

Bekijk gratis de handleiding van Nedis WIFIP120GWT (8 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 27 mensen en kreeg gemiddeld 4.1 sterren uit 7 reviews. Heb je een vraag over Nedis WIFIP120GWT of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Full manual Nedis SmartLife ™

Download the app: Nedis SmartLife from Apple App store or Google Play Store.

Create account

Select country code and enter full naonal phone number or email address and then

request vericaon code.

Enter received vericaon code and pick your own password.

Add device

1.Tap “+” on the top right corner. A list of potenal products appears.

2.Select the device type you want to add from the list

3.Acvate the device to be added by plugging it in or connecng the baer y.

4.Make sure the indicaon LED (or the lighng device) ashes quickly (as shown in example in the

applicaon) and tap the buon to conrm.

If the light is not ashing quickly hold the reset buon (or switch the bulb o and on for 3 mes) unl

it ashes.

5.Conrm your phone is connected to the Wi-Fi network to which the device will be added, enter the

Wi-Fi password and conrm.

6.Now the device will be searched, make sure your phone and the device are close to the router to

opmize recepon.

7.Aer the product is found and added, rename it so you can easily recognize it.

If above method fails (this can be due to unstable network or specic network protecon) add the device using

AP mode by following the steps below.

Add device (AP mode)

1.Tap “+” on the top right corner. A list of potenal products appears.

2.Select the device type you want to add from the list

3.Hold the reset buon (or switch the bulb o and on for 3 mes) unl the indicaon LED (or lighng

device) ashes (as shown in example) SLOWLY

If the light is ashing quickly, reset again by holding the reset buon for about 5 seconds or switching

the light o and on 3 mes.

4.Conrm the Wi-Fi network to which the device will be added, enter the Wi-Fi password and conrm.

5.Connect -Fi hotspot (SmartLife_xxxx) your phone to the device’s Wi

6.If asked: conrm to stay connected to Wi-Fi network without internet access

7.Go back to the Nedis SmartLife applicaon to connue installaon.

8.Now the device is sent the instrucons to connect to your exisng Wi-Fi network, make sure your

phone and the device are close to the router to opmize recepon.

9.Aer the product is found and added, rename it so you can easily recognize it.

Product specificaties