Monacor KP70-400 Handleiding

Monacor Niet gecategoriseerd KP70-400

Lees hieronder de 📖 handleiding in het Nederlandse voor Monacor KP70-400 (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
Manufactured by :
CRC Industries Europe BVBA
Touwslagerstraat 1 – 9240 Zele – Belgium
Tel (32) (0) 52/45.60.11 Fax (32) (0) 52/45.00.34
www.crcind.com
TECHNICAL DATA SHEET
1/3
PLASTIK 70
Ref. : 20743
1. GENERAL DESCRIPTION
Quick drying, colorless transparent insulating and protective coating based on acrylic resins.
2. FEATURES
• PLASTIK 70 is a low viscosity, solvent drying acrylic based conformal coating with
excellent insulating properties. The lacquer is colorless transparent and elastic. It has a
durable adhesion in the temperature range from –40°C to +60°C and can be used for a
short period of time up to +100°C maximum. It protects printed circuit boards and
surfaces from humid inorganic-acid or caustic vapors.
• PLASTIK 70 is colorless-transparent and as such is not visual on the printed circuit board
surface.
• Contains “moisture warning”: To avoid involuntary encapsulations of moisture, Plastik 70
will warn you when applied on a humid surface, by showing a frosted, mat appearance.
• For repair works PLASTIK 70 can be soldered through or be totally removed with
acetone, THINNER FOR PLASTIK 70.
3. APPLICATIONS
PLASTIK 70 was specially developed to protect printed circuit boards. It overcomes electrical
leakages and short circuits.
As a low viscosity xing and insulating lacquer, PLASTIK 70 can also be used as extra/after
insulation of coils and transformers and overcomes disturbing noises.
PLASTIK 70 can also be used as a universal protective coating on any surface like metal,
paper, ornaments, paintings, furniture, etc.
4. DIRECTIONS
• For small runs and service applications, the easiest way to apply PLASTIK 70 is from an
aerosol can. Spray from a distance of 20 to 30 cm on the dry and degreased surface. As
pre-cleaning of PCB’s, we do recommend the use of KONTAKT PCC to remove greases,
dirt and ux residues. When nished spraying, clean the aerosol valve by turning the can
upside down and pressing the button until only propellant escapes.
• For serial production runs, PLASTIK 70 in bulk can be applied by brush or by dipping. For
spraying, two parts per volume PLASTIK 70 is diluted with up to one part of THINNER
FOR PLASTIK 70. The precise mixing ratio must be determined by trials with the
equipment concerned.
• For dip coating it is also necessary to x the immersion time and the withdrawal speed.
The faster the removal from the bulk, then thicker the lm will be. Dipping baths have to
be carefully protected to ensure no entrapment of conductive stuck-on residues.
Manufactured by :
CRC Industries Europe BVBA
Touwslagerstraat 1 – 9240 Zele – Belgium
Tel (32) (0) 52/45.60.11 Fax (32) (0) 52/45.00.34
www.crcind.com
TECHNICAL DATA SHEET
2/3
PLASTIK 70
Ref. : 20743
• PLASTIK 70 contains solvents like ethyl acetate and butyl acetate. Printed circuit board
materials and electronic components generally have a good compatibility with these
solvents. In case of plastic surfaces (e.g. housings) a compatibility test is always
recommend. It is necessary in particular, to test its suitability for plastics susceptible to
stress cracking (e.g. polycarbonate).
• PLASTIK 70 contains ammable solvents and hence when working with the product,
make sure there is good ventilation in the workplace. Remove all possible ignition
sources.
• A safety data sheet (MSDS) according to EU directive 91/155/EEC and amendments is
available for all CRC products.
5. TYPICAL PRODUCT DATA (without propellant)
As delivered
Coverage at 20µm, calculated : ±0.7m²/200 ml spray
±9m²/litre
Viscosity bulk : 10-20 mPas
Flashpoint : <0°C
Drying time at 20°C (dry to touch) : ±20 minutes
Properties dry lm
(after 24 hrs drying at ambient temperature, thickness 20-40 µm)
Aspect : colorless-transparent
Surface resistivity at 20°C : >10
13 Ω
Volume resistivity at 20°C : >10
13 .cm Ω
Dielectric strength : >80kV/mm
Adhesion to copper plates, measured at ambient temperature
following 6 hrs at –40°C : Gt 0-1
following 6 hrs at +60°C : Gt 0-1
following ½ hr at +100°C : Gt 0-1
Manufactured by :
CRC Industries Europe BVBA
Touwslagerstraat 1 – 9240 Zele – Belgium
Tel (32) (0) 52/45.60.11 Fax (32) (0) 52/45.00.34
www.crcind.com
TECHNICAL DATA SHEET
3/3
PLASTIK 70
Ref. : 20743
6. PACKAGING
aerosol : 12 x 200 ml
12 x 400 ml
Bulk : 1 Liter , 5 Liter
All statements in this publication are based on service experience and/or laboratory testing. Because of the wide
variety of equipment and conditions and the unpredictable human factors involved, we recommend that our
products be tested on-the-job prior to use. All information is given in good faith but without warranty neither
expressed nor implied.
This Technical Data Sheet may already have been revised at this moment for reason such as legislation,
availability of components and newly acquired experiences. The latest and only valid version of this Technical
Data Sheet will be sent to you upon simple request or can be found on our website: . www.crcind.com
We recommend you to register on this website for this product so you will be able to receive any future updated
version automatically.
Version : 20743 03 1003 03
Date : 14 January 2014

Product specificaties

Merk: Monacor
Categorie: Niet gecategoriseerd
Model: KP70-400

Heb je hulp nodig?

Als je hulp nodig hebt met Monacor KP70-400 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Monacor

Monacor

Monacor EMA-20 Handleiding

28 Augustus 2023
Monacor

Monacor PA-1200RDSU Handleiding

1 Juli 2023
Monacor

Monacor RF-EXPLORER/3 Handleiding

30 Juni 2023
Monacor

Monacor KKS75-400 Handleiding

30 Juni 2023
Monacor

Monacor EX-40/8 Handleiding

29 Juni 2023
Monacor

Monacor TY5242MXR Handleiding

28 Juni 2023
Monacor

Monacor ATS-35CB Handleiding

27 Juni 2023
Monacor

Monacor CU-48DMX Handleiding

24 Juni 2023
Monacor

Monacor MEVAC-4 Handleiding

21 Juni 2023
Monacor

Monacor PM-2/30V Handleiding

20 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Bauknecht

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024
Fakir

Fakir Artemis TS 150 Handleiding

26 April 2024
Sony

Sony UTX-M03 Handleiding

26 April 2024
Sony

Sony URX-P03 Handleiding

26 April 2024
Sony

Sony WRU-806B Handleiding

26 April 2024
Sony

Sony UTX-B03 Handleiding

26 April 2024
Sony

Sony UTX-P03 Handleiding

26 April 2024
Sony

Sony ODS-L10 Handleiding

26 April 2024
Sony

Sony PDW-U4 Handleiding

26 April 2024
Sony

Sony NXL-FR318 Handleiding

26 April 2024