Gorenje ECT 600 E Handleiding

Gorenje Fornuis ECT 600 E

Lees hieronder de 📖 handleiding in het Nederlandse voor Gorenje ECT 600 E (13 pagina's) in de categorie Fornuis. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/13

Instructions for use, mounting and connection

Built-in ceramic-glass cooktop GB IE MT

Dear customer !

The built-in ceramic-glass cooktop is intended for household

use only.

Materials used for packaging are nature friendly and may be

recycled, deposited or destroyed without any threats to the

environment.

In order to recognize these features, all packing materials are

marked with relevant symbols.

Once your appliance has become obsolete and you do not

intend to use it any longer, take adequate care not to litter the

environment. Deposit your old appliance with the authorized

depot dealing with used household appliances.

Instructions for use

Instructions for use have been prepared for the user, and

describe the particulars and handling of the appliance. These

instructions apply to different models from the same family of

appliances, therefore you may find information and

descriptions that may not apply to your particular appliance.

Installation instructions

The appliance should be connected to the power supply in

accordance with the instructions from the chapter "Electrical

connections" and in line with the standing regulations and

standards.

The connections should be carried out by a qualified personnel

only.

Rating plate

The rating plate with basic information is located underneath

the appliance.

Fire hazard protection

Appliances are allowed to be mounted on one side next to a

high kitchen cabinet, the height of which may exceed that of

the appliance. On the opposite side however, only a kitchen

cabinet of equal height as the appliance is allowed.

Important warnings...................................................... 16

Connection to the power 17supply ..................................

Basic adjustment of sensors to the ambience

Installation diagram

Mounting the built-in 18cooktop.....................................

Caution !

Dimensions of the built-in hob opening

Installation procedure

Ceramic-glass cooktop ................................................. 19

Cookware ...................................................................... 19

Energy saving tips

Glass ceramic hob control 20elements ............................

Control panel

Control elements

Automatic cooking mode

Blocking the hob operation

Timer function

Limited time of operation

Safety functions and error display

Cooker controls .............................................................24

Control panel

Control elements ...........................................................25

Switching the hob on

Selecting the particular hotplate

Switching the hotplate on

Automatic cooking mode

Blocking the hob operation

Remaining heat indicators

Switching the entire hob off

Limited operation time

Power interruption

Safety warnings and error indication

Cleaning and maintenance of ceramic-glass hob........27

Technical information...................................................28

Important warnings

• The appliance may be built-in and connected to the power

supply only by a qualified technician.

• Particular areas of the cooktop surface (adjacent to the

hotplates) are hot during operation. Prevent the children to

hang around the appliance and warn them properly against

the danger of burns.

• Hot oil ignites readily, so be sure have the preparation of

such food (fries) under constant control.

• Hotplates may not be left in operation empty, without any

dishes on top.

• Never use the appliance for heating the ambience.

• Never use the ceramic-glass cooktop as a working surface.

Sharp objects may damage the cooktop surface.

• Preparation of food in aluminum or plastic cookware is not

allowed. Never place any plastic objects or aluminum foil

upon the cooktop surface.

• In case any other appliances are plugged in the electric

mains close to the cooktop, prevent the contact of the plug

cable with the hot cooking zones.

• Never keep any flammable or temperature sensitive objects,

like cleaning agents, sprays, detergents, etc., below the

appliance.

• Never use cracked or broken ceramic-glass cooktop. In case

you notice any visible cracks on the surface, cut the power

supply immediately.

• In case of any malfunctions, disconnect the appliance from

the power supply and call service department.

• Do not use high-pressure steam cleaner or hot steam to

clean the appliance.

The symbol on the product or on its packaging

indicates that this product may not be treated as

household waste. Instead it shall be handed over to

the applicable collection point for the recycling of

electrical and electronic equipment. By ensuring this

product is disposed of correctly, you will help prevent

potential negative consequences for the environment and

human health, which could otherwise be caused by

inappropriate waste handling of thisproduct. For more

detailed information about recycling of this product,

please contact your local city office, your household waste

disposal service or the shop where you purchased the

product.

Instructions for use, mounting and connection 17

Connection to the power supply

• Connections may be carried out by a qualified technician only.

The earthing protection must comply with the standing

regulations.

• Connection terminals are revealed when the connection box

cover is removed.

• Prior any attempted connection check that the voltage indicated

on the rating plate is in line with your home power supply.

• The rating plate is located underneath the appliance.

• The appliance is manufactured for use with the power supply

voltage AC 230 V.

• The electric wiring should be equipped with a circuit breaker able

to isolate the appliance from the mains in all points, with the

distance between terminals of at least 3 mm in open position.

This may be done by means of fuses, safety switches, etc.

• The connection should be selected in accordance with the

declared charge capacity of the mains and the fuse power.

• Such appliances are allowed to be mounted on one side next to

a high kitchen cabinet, the height of which may exceed that of

the appliance. On the opposite side however, only a kitchen

cabinet of equal height as the appliance is allowed.

• Upon the completion of installation, live wires and isolated cables

must be adequately protected against accidental touching.

• Distance between the cooktop surface and the cooking hood

must be such as indicated in the instructions for use of the hood.

• Kitchen cabinets may not be mounted underneath the built-in

ceramic-glass cooktop.

Basic adjustment of sensors to the ambience

Upon each connection to the power supply the sensors of the

appliance are automatically adjusted to the environment to

ensure their proper function. All displays indicate the sign "-".

Once the successful adjustment is completed it is signaled with

a beep, all displays are switched off and your cooktop is ready

for use.

During the adjustment procedure the sensors must be free of

any objects, otherwise the adjustment procedure will be

interrupted until such objects are removed from the sensor

surface. During this period the regulation of the cooktop is

impossible.

ATTENTION !

Before attempting any repairs on the appliance, disconnect the

power supply. In accordance with the mains voltage the

appliance should be connected in line with the attached

diagram. The earthing wire (PE) must be connected to the

terminal marked with the earthing symbol .

The connection cable must lead through the relief safety

device, protecting it from accidental pulling out.

Upon the completion of installation switch all the hotplates on

for about 3 minutes to check the proper functioning.

Installation diagram

NOTE

In some connection boxes the connector bridges are placed between contacts 4 and 5, and in the others they are stored at a

designated place within the box. These boxes have the connection screws already in open position so they need not be unscrewed.

Connection may be carried out by means of:

− rubber coated connection cables, model H05 RR-F 4x1,5 with yellow-green earthing cable;

− PVC insulated connection cables, model H05 VV-F 4x1,5 with yellow-green earthing cable; or

− any other suitable cables.

Instructions for use, mounting and connection

Mounting the built-in cooktop

Caution !

• To avoid any possible hazard, the appliance may be

installed by qualified personnel only.

• Panels and furniture lining of the kitchen cabinet receiving

the hob must be treated with temperature resistant

adhesives (100°C), otherwise they might be discoloured or

deformed because of inadequate temperature resistance.

• The cooking hob is intended for building into the worktop

above the kitchen element of 600 mm width or more.

• After the installation of built-in hob make sure that there is

free access to the two fixing elements in front.

• Suspended kitchen elements above the cooktop must be

installed at such distance to provide enough room for

comfortable working process.

• The distance between the worktop and the hood must be at

least such as indicated in the instructions for installation of

the kitchen hood, but in no case it may be less than 650

mm.

• The smallest distance between the edge of the appliance

and the adjacent high kitchen cabinet is 40 mm.

• The use of hard wood decorative borders around the

worktop behind the appliance is allowed, in case the

minimum distance remains as indicated on the installation

illustrations.

• Minimum distance between the built-in cooktop and rear wall

is indicated at the illustration for the installation of the built-in

cooktop.

• The appliance may be installed in any worktop with a

thickness from 30 mm to 50 mm.

• In case there is a drawer in kitchen cabinet under the built-in

hob, it is necessary to install an additional horizontal barrier

of height 6 cm under the hob and above the drawer

Dimensions of the built-in hob opening

Installation procedure

• Worktop must be placed absolutely horizontal.

• Suitably protect the edges of the cut aperture.

• By means of the supplied screws 4 (or 6 by some models)

fasten the supplied tightening brackets 4 (or 6 by some

models) fasten to the front and the rear side of the cooking

hob and to the prepared aperture.

• Connect the cooking hob to the mains power supply (see

instructions for the connection of the cooking hob to mains

power supply).

• Insert the hob into the cut aperture.

• Press the hob firmly towards the worktop from above.

Product specificaties

Merk:	Gorenje
Categorie:	Fornuis
Model:	ECT 600 E

Heb je hulp nodig?

Als je hulp nodig hebt met Gorenje ECT 600 E stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Fornuis Gorenje

Gorenje GTW641SYB Handleiding

26 Maart 2024

Gorenje GT641SYW Handleiding

26 Maart 2024

Gorenje K57375AW Handleiding

26 Maart 2024

Gorenje K57375ABR Handleiding

26 Maart 2024

Gorenje GT641SYB Handleiding

26 Maart 2024

Gorenje HET749BSC Handleiding

25 Maart 2024

Gorenje GK6B41XD Handleiding

25 Maart 2024

Gorenje GK6B41WD Handleiding

25 Maart 2024

Gorenje EC5121WG-B Handleiding

14 Maart 2024

Gorenje GI6401WSC Handleiding

11 Maart 2024

Handleiding Fornuis

Nieuwste handleidingen voor Fornuis

AEG NCP84C01AZ Handleiding

28 April 2024

AEG TI64IB30IZ Handleiding

28 April 2024

Midea MC-HV848 Handleiding

28 April 2024

IKEA TILLREDA 005.558.96 Handleiding

27 April 2024

IKEA MATMÄSSIG 905.136.04 Handleiding

27 April 2024

IKEA VASASTAN 405.236.05 Handleiding

27 April 2024

Bertazzoni PRO1005GGVLXE Handleiding

25 April 2024

Bertazzoni P905CAPROX Handleiding

25 April 2024

Mestic MIC-120 Handleiding

25 April 2024

LG LCE3010SBE Handleiding

18 April 2024