Crestron CAEN-UMP2X2 Handleiding

Bekijk gratis de handleiding van Crestron CAEN-UMP2X2 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 9 mensen en kreeg gemiddeld 4.1 sterren uit 9 reviews. Heb je een vraag over Crestron CAEN-UMP2X2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

CAEN-UMP – Universal Mounting Plates

Introduction

Crestron Universal Mounting Plates (CAEN-UMP Series)

are a complete line of accessory plates, which allow

mounting of non-Crestron equipment to any Crestron

Automation Enclosure (CAEN-Series). Third-party

products such as phone and alarm systems can be

mounted to these plates within an enclosure. The

advantage to using the CAEN-UMP is that a variety of

sizes are available and each plate occupies the same area

as one, two or four Crestron lighting modules (CLX-

Series). The size corresponds to the number of module

spaces and their arrangement within the enclosure. For

example, CAEN-UMP2x2 occupies four module positions

and CAEN-UMP1x1 occupies one module position. The

others (CAEN-UMP2x1 and 1x2) occupy two module

positions. Refer to the illustration on this page for an

example of plate location and orientation within a double-

wide enclosure. The table beneath the illustration lists the

dimensions and weight for each CAEN-UMP model.

Installation

The CAEN-UMP must be mounted in accordance with all

national and local codes.

NOTE: Adhere to Class 1 versus Class 2 wiring

requirements when considering the equipment

attached to the CAEN-UMPs in an enclosure.

NOTE: Third-party equipment attached to a

CAEN-UMP within a Crestron Automated Enclosure

should not be considered part of the Crestron system.

Use the four screws (8Bx1/4”, supplied) to attach a

CAEN-UMP to an enclosure. Crestron recommends that

the keyholes on the plates be located toward the outer

edges of the enclosure as shown in the drawing on this

page. As a result, the flanges of the plates do not overlap

each other when positioning any combination of CAEN-

UMP2x1s, CAEN-UMP1x1s, or lighting modules side-

by-side in an enclosure.

Further Inquiries

If after reviewing this guide, you cannot locate specific

information or have questions, please take advantage of

Crestron's award winning customer service team. Call:

• In the US and Canada, call Crestron’s corporate

headquarters at 1-888-CRESTRON

[1-888-273-7876] or 1-201-767-3400.

Example of CAEN-UMP Location and Orientation

2x2

2x12x1

1x2

1x11x1

Universal Mounting Plate Dimensions & Weight

CAEN-UMP 2x2 2x1 1x2 1x1

Height

15

1

/

8

15

1

/

8

7

7

/

16

7

7

/

16

Width

146

15

/

16

146

15

/

16

Depth

5

/

8

5

/

8

5

/

8

5

/

8

Weight

22.612.012.46.6

Dimensions are provided in inches, edge to edge.

Weight is provided in ounces.

Crestron Electronics, Inc.Installation Guide – DOC. 5981

15 Volvo Drive Rockleigh, NJ 0764707.02

Tel: 888.CRESTRON

Fax: 201.767.7576Specifications subject to

www.crestron.comchange without notice.

Product specificaties